GIGA BASS BOOSTER USING LM 324 IC & 12 VOLTS DC

on
Here I will share the circuit to add bass sound louder, but still pleasing to the ear.

This circuit is enough to use asymmetric + 12V voltage, making it easier for you to get the voltage supply. And this circuit using op-amp LM324 as the main sound processor.

The following circuit uses a single 12VDC power supply, in addition to functioning as a bass sound enhancer, this circuit can also be used as a low pass filter. Unlike the bass/subwoofer filter circuits that are here like: Subwoofer Module Amplifier using 4558 with PCB


Here is a circuit diagram  called Giga Bass Pro:
The Giga Bass Plus kit uses the LM324M IC as its heart, and is equipped with volume control for its bass tones, and has been equipped with a series of regulators.

 PCB SILK SCREEN & BOTTOM COPPER LAYOUT
                                  

PCB SIZE : 44 MM W × 53 MM H 

  SILK SCREEN :
 

 BOTTOM COPPER LAYER :

 

SOLDER MASK :
 
HERE THE VIDEO:


                                    

DOWNLOAD :

GERBER: https://drive.google.com/open?id=0B4TWHqtF1I0lVkRSb1NSdGRreFU

SPRINT LAYOUT :https://drive.google.com/open?id=0B4TWHqtF1I0lcWhiTWxzczd2aVU

SCHEMATIC: https://drive.google.com/open?id=0B4TWHqtF1I0lOFVtVkhPWG9pRnc

SOLDERMASK: https://drive.google.com/open?id=0B4TWHqtF1I0lMWI1NmVmMXZ1Z2c

bass booster

Comments

  1. Unknown28 February 2018 at 03:37

    Xlent

    ReplyDelete
  2. Unknown13 September 2018 at 11:22

    Thank you for sharing. I'm going to try that in my little speakers project.

    ReplyDelete
  3. Anonymous26 October 2018 at 00:59

    Sir aap blog post ko edit kijiye 👆 uper link likha hoga vaha aap link daliye to aapki link khulegi nahito txt me hi dikhegi
    good work
    Or blog ka SEO bhi karlo
    http:// ko Yes Kardo

    ReplyDelete
  4. Anonymous19 November 2018 at 02:51

    Thanks for the post checkout the best bass booster app for android.

    ReplyDelete
  5. Unknown5 October 2019 at 10:39

    PCB size

    ReplyDelete
  6. Unknown3 November 2019 at 09:33

    Where is the out put signal pin?

    ReplyDelete
  7. Vincent Jay Stone13 November 2019 at 05:44

    Great design sir,, ahm by the way.
    Where is much better to put this?
    Before Tone control or After Tone control circuit?

    ReplyDelete
  8. ripto29 June 2020 at 06:54

    Thank you for sharing..copy permission..

    ReplyDelete
  9. Fernando Bautista5 April 2022 at 13:56

    hi...i sent ask for download the file

    ReplyDelete
  10. Harshana13 October 2022 at 10:51

    What about Power in side miler cap and resister

    ReplyDelete

Post a Comment